Total Pageviews

Saturday, 15 June 2019

economic real estate

Well , it's certainly been a while.  I have once again had my gaming time diverted by health problems. Unfortunately it's never going to go away but I have learned to adapt.  Anyway, all fine now and I have finally found my interest in gaming once more.  For many years now I have always looked on the shelves of the cheap shops or pound shops as I think they are called in the uk. last week while looking for plastic boxes to use as carry cases I spotted some resin aquarium decorations that just might be useful.. The scale was well, generic but close enough not to worry me and I'm pretty flexible when it comes to scales for scenic items.  So here's the tale of some cheap toys. They were priced at 3 euros each and I have seen far worse for 10 times that in "official" pet shops.  Job done I walked away with 3 mini fantasy castles for just under a tenner .

                 The buildings were in  a ruined state so I went to work with the Dremel and removed all the rubble and broken wall pieces. When that was done out came the green stuff and they were as good as the day they were built. Well almost. They needed some retouching of paintwork and a change of some of the more garish colours and finally my vision was island pieces for my imaginations. A quick piece of island building with cork sheet , some polystyrene and PVA glue and there we go . So enough verbosity.

First lets take a look at what we bought:-


 This one was particularly ruined with piles of rubble and missing sections of roof .. This really needed a lot of work to make it lived in. 



I like this one a lot. First the separation of the buildings and all the multi level add ons that hung in space. When I built the island I built it so the slopes came under the hanging bits and they appeared to be built naturally on the island.






This was the most fantasy inspired design of the three so I decided to accept it for what it was , did minimal rebuilding and dulled all the colours down. They still look like fantasy buildings but I think it will look ok on the table.  This was built as an edge piece rather than an island.











Here are the finished items



 Nicely toned down Lots of rebuilding with green stuff but I think well worth it.








I really like this finished item.. I built a shallow beach on one side for fishing boats and a small wharf on the deep water side for the big Zondersee supply barges.




Bit too fantasy island for my taste but I built it into a lakeside piece and it won't look too bad.  






As an exercise in cheap scenic pieces I thoroughly enjoyed working on them and will certainly keep my eyes open for similar bargain price aquarium decorations. Now to get them on a table with some ships ..  

Monday, 21 January 2019

The round table rides again...............



                  This post really should have preceded the last one but never mind. As part of my 25mm adventure I invested in the footsore miniatures character pack of a mounted king Arthur. (he is real and yes he's only sleeping). These are beautiful models and just begged to be painted. Now I would like to point out that I haven't painted a 25mm mounted figure since about 1980. paints were enamels and came in little round tine. Basing was a bit of green cardboard and tints/inks/shades were unknown.  I did quite a bit of experimenting with techniques while preparing the infantry figures posted earlier and to my surprise you can teach an old dog new tricks. I approached painting the horse with great trepidation especially after looking at other folks offerings across the web. Finally I took the bull by the horns and simply upsized the technique i used for 6mm and 10mm to 25mm and hoped different varnishes ie gloss followed by matte would do the trick. I was rather pleased. What do you think?


 I was quite happy with the end result and it kind of left me with an urge to try my hand at more.











                          Next step was to get enough armoured and unarmoured cavalry to give me a reasonable amount to field in a 4 or 6 point Arthurian Saga force. Again I didn't NEED these troops so again it was more a pleasure project than a must have. Sixteen figures would be the target and the price of the metal figures kind of made my eyes water. I thought again and in the end I decided that my experience with Gripping beast plastic infantry had been a pleasant one and I still had a lot of figures and parts left from the 3 packs I had bought and thus available for spares and conversions. The plan was therefore to invest in a box each of late roman cavalry and dark age cavalry. twelve figures in each box would be enough for Arthur's pals and some late roman cavalry to go with my earlier painted army purchase.


                          When they arrived I realised they were going to need some work. I started to by carving out all the plastic inside the reins. It was just to ugly for me to ignore. I would have preferred mounts closeer to the shorter, sturdier mounts of the early dark ages but I had little choice but to accept the noble warhorses that come in the pack.  Anyway, I spent many hours and a lot of enjoyment preparing the figures . I mixed heads , weapons made brass spears and javelins. I added spare javelin bags to the horses and swords and scabbard slings to the dark age cavalry.  After the first few I started to change body positions cutting arms to different angles and cutting figures at the waist to swivel the upper torso round.  I really did have a lot of fun. I changed some of the horse legs from model to model to give even more variation and some of the armoured figures received horse armour from paper and card.. that was perhaps a bit laborious but it made a huge difference.

            So enough prattling on from me . Here is how it all turned out.






The first 4 armoured troops were action figures I had to change the legs on a couple to make them look more like charging but that was really easy. The armour on the charging horse was a pain in the arse and I left any further armour for standing horses .



The second group were standing or trotting mounts I only armoured one of the horses this time. that wasn't so pleasurable.





 Now my attention passed to the unarmoured guys.  I wanted to be able to use these in a number of dark age British forces so I made quite a few with Celtic or generic  dark age shield designs rather than christian emblems. Again lots of work but very satisfactory.




Again I did an action group and trotting group.   .























            So it ends or maybe not. I acquired a box of Saxon thegns recently and have a lot of dark age infantry figures left. I may just try my hand at Early Saxons next. Oops did I just order Saxon bucklers and shield designs... <SIGH>










Tuesday, 15 January 2019

The last of the Romans.... I think

                       In my previous post I hinted that I had turned my hand to building, converting and painting 28mm cavalry for my SAGA forces. As a result, I invested in a box each of late Roman cavalry and Dark age cavalry. I built a large cavalry arm for my Romano-British forces and learned a lot in the process. I swapped heads, parts of heads, weapons, upper and lower body parts and even legs on horses. I added parts like horse armour and built folded cloaks and baggage from green stuff. I really enjoyed myself. When I "had finished "  the cavalry figures I needed (some 16 figures) I had quite a lot of bits left and so decided to make a small unit of cavalry for the late Rona army I had purchased. Now I will make a more extensive post on the forces of Arthur in a later article but present here my Romans in all their glory.


I particularly like the added baggage from green stuff and the javelin bags from paper and card.

the figures are a joy to work with and with the addition of paper strapping for the sword scabbards and heavy changes of limb positions they have provided me with an almost unique force.












  Next up will be the Romano-British cavalry.